WiFi Camera

I am closing on the completion of a “contract” to create a set of three WiFi camera enclosures. The electronics consist of a Raspberry Pi Zero W, and a Pi Camera with IR LEDs.

CapturePi Capture

The 3D printed parts were to provide a protective enclosure for the camera and to attach the Raspberry Pi to a swiveling  mount. The case for the Raspberry Pi is a commonly available part and the mount is part of a cell phone mounting device, purchased at the local Dollarama

2019-04-19 12.35.12  2019-04-19-12.35.40.jpg

The 3D Printed parts were cobbled together from a design by Dr Snake using Tinkercad, and the end result is starting to look pretty good.



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s